Forklift Operator Checklist

Although forklifts are designed to perform rugged tasks, each time they are used they can get damaged in myriad of ways. That's why inspections are so important. At the start of each shift, perform both a visual inspection of the general condition and cleanliness of the lift truck, as well as an operational check to test its functioning properly. If you notice anything that may affect the normal operation of the forklift, immediately alert your supervisor.

Checklist for Visual Inspection

• floor clear of objects that could cause an accident
• no obstructions overhead.
• note any nearby objects to avoid as you drive away
• fire extinguisher present, and charged
• engine oil level, fuel level, radiator water level (LPG, gas and diesel forklifts)
• battery fully charged and securely in place
• cables for exposed wires
• battery plug connections not loose, worn or dirty
• vent caps not clogged
• electrolyte levels in cells
• hold downs or brackets
• bolts, nuts, guards, chains, or hydraulic hose reels not damaged, missing or loose
• wheels and tires not worn or damaged
• air pressure of pneumatic tires
• forks not bent or cracked
• positioning latches in good working condition
• carriage teeth not broken, chipped or worn
• chain anchor pins not worn, loose or bent
• no damp spots or drips that may indicate a leak
• hoses held securely, not loose, crimped, worn or rubbing

Checklist for Operational Pre-Use Inspection

• horn working and loud enough to be heard in working environment; other warning devices operational
• floor brake: pedal holds, unit stops smoothly
• parking brake: holds against slight acceleration
• deadman seat brake: holds when operator rises from seat
• clutch and gearshift: shifts smoothly with no jumping or jerking
• dash control panel: all lights and gauges operational
• steering: moves smoothly
• lift mechanism: operates smoothly (check by raising forks to maximum height then lowering completely)
• tilt mechanism: moves smoothly, holds (check by tilting mast all the way forward and backward)
• cylinders and hoses: not leaking after above checks
• no unusual sounds

Only permit qualified people to operate, service and maintain forklift and lift trucks. For assistance with your training and certification needs, contact Lucas today at 905-227-7554 or at info@lucasliftruck.com.